For lightning protection equipotentialisation. Suitable for Class 1
Protection. Can be used as per IEC61024 & 61312. Suitable to connect
between incoming power lines and earth terminal at zone intervals LPZ
0 & LPZ 2. Can be directly connected before the final equipment
to be protected.
| Specification |
|
Requirement Class |
Type 1 and 2 as
per IEC61643 – 1
|
|
Network |
3 Phase TT |
|
Device |
Encapsulated Spark Gap and MOV |
|
Normal
Line Voltage |
230 / 400 volt, 50 Hz |
|
Impulse
Current (10/350µS) |
125 KA |
|
Nominal Discharge
Current (8/20µS) |
200 KA |
| Voltage Protection
Level |
800 volt |
|
Response
Time |
< 25 Nano Sec |
|
Degree
of protection |
IP55/65 |
|
Temperature
Range |
- 40 ° C to + 70 ° C |
|
Dimension
in mm |
H x W x D 300 x 300 x 170 (3 phase)
253 x 217 x 115 (1 phase) |
| Advantages |
1. Type 1 and 2 arrester in a very
compact enclosure.
2. Can be used in large networks having a line current up to 500
Amps. |
<< Back
